Boots CS-1000 Manual de usuario descargar pdf (Pagina 10)

CPPM call servers are a single board solution and can be used for Standard availability (SA) & High availability

(HA) systems. The security device is carried on the board itself and the “Side “ information is set in the software.

As a call sever the CPPM has a 1GB Compact flash as its FMD (fixed Media Device – hard drive) and uses a

512 Mb compact flash for software installation, RMD (Removable Media Device). To set the board to boot from

the compact flash the onboard switch is set to position 1.

CPPM devices use a standard IPE slot in a Media Gateway but only receive power from it and connect to the

console port through it. They do not communicate with other cards in the chassis or cabinet across the

backplane.

A High Availability CPPM based system will support a combination of up to 50 Media gateways or 22500 IP

Sets.

CS1K - Setup & Admin 08092801

@ Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 131 132

Sin comentarios

Boots CS-1000 Manual de usuario Pagina 10